|Starter Units & Add On Units
These are assemblies that are made of solid wood
"Uprights" and "Freestanding Kits"
Click here to see how our
units are assembled
Uprights are manufactured from clear, Solid Hemlock
or Douglas fir. Two 1-5/16" x 1-5/8" stiles have a 3/8" wide
x 5/8" deep plow the entire height to receive shelf end
channels and are drilled with 3/16" diameter holes on 1"
centers to allow for shelf adjustability. Stiles are to be
locked together with two or more cross members mortised into
the stiles. All components are to be machined smooth with
all outside corners eased. Uprights
are available unfinished sanded smooth or in clear
water based lacquer or select tinted water based
are manufactured of 3/4" edge-glued and finger-jointed pine.
All shelf materials are machined to accept formed aluminum
extrusions shaped to fit into a routed slot on the end of the
shelf and to rest on the shelf support pins.
Shelves are available unfinished sanded smooth or in clear water
based lacquer or select tinted water based finishes.
from 3/4"thick Solid Pine. This kit includes 4
boards and hardware. Two boards connect uprights at
the bottom and two connect at the top to create a
Starter Frame or Add On Frame. Bolts and special
embedded barrel nuts are used to securely bolt
frames together. A simple "Allen" wrench is all that
is needed to screw the boards together with the
uprights (Allen wrench is included).